Home / Connecting the Cameras to the DVR

Connecting the Cameras to the DVR

Connecting the Cameras to the DVR

1. Unravel the Camera Cable and separate the two ends. Each end should contain one BLUE video connection and one RED power connection

2. Locate the PURPLE stickers attached to the wires with the BLUE connection.

    • One sticker should say “Connect to Camera”, the other sticker should say “Connect to DVR”
3. Take the BLUE connection from the Camera Cable that has the “Connect to Camera” sticker and connect it to the BLUE connection attached to the Camera.
Your Loocam device features a security lock on our Camera Cable which will lock the cables in place ensuring a safe and constant connection. Line up the pin, push in and turn clockwise. 

Locking Mechanism

4. Take the RED power connection from the Camera Cable, and attach it to the RED power connection attached to the Camera.

Connecting the Camera to the DVR

5. Take the BLUE connection that has the sticker and connect it to the back of the DVR under the desired channel.

    


 Don’t forget to use the security lock. Line up the pin, push in and turn clockwise.

 

 6. Take the RED connection attached to that same cable, and connect it to one of the ends of the 4-to-1 Power Splitter.

 

7. Connect the other end of the 4-to-1 Power Splitter to the Camera Power Adapter.

8. Repeat Steps 1-7 for any additional cameras.

9. Once all cameras are connected, connect the Camera Power Adapter to a surge protector or power outlet. To protect your Loocam device we recommend using a surge protector to prevent against electrical damage.
Next Page - Connecting the DVR to an HDMI TV or Monitor