Schedule > Motion
Set the schedule for the camera’s built in motion detector. Each box represents one hour. Selected boxes are marked light blue, which indicates the cameras motion sensor will be active during that time. Double-click on a date to determine your recording schedule for that day. The default is 24 hours a day, 7 days a week.
Motion Recording:: An alternate recording method to Schedule. Selected boxes are marked light blue, which indicates that the DVR will be recording if motion is detected during the times indicated.
1. Channel List: Select the channel you wish you schedule from the drop down list.
2. Scheduling Box: Each box represents one hour, from left to right, starting at 12AM - 1AM, and ending at 11PM-12AM. Double click on a one hour block to set the schedule for that day. Light blue boxes, as pictured, indicate that the DVR will be recording during that time.
3. Copy Button: Copy the settings for one channel to other channels. Select the channels you will copy the settings to by using the “Apply Settings To:” drop down menu. Once you select the channel you will copy the settings to, select the “Copy” button.
4. Quick Add/Quick Remove: Quickly add or remove one hour boxes from the Scheduling Box.
Set a Schedule Menu
Use this menu to set a more precise schedule than what the Quick Add and Quick Remove tools can offer.
1. To set your schedule, select the day of the week you want to schedule from the drop down menu.
2. Select Add to create a new schedule.
3. Select Delete to delete an existing schedule.
4. Using the drop down menu select your Start Time and End Time.
5. Confirm your selection by clicking the check mark.
To copy the settings for one channel to other channels:
6. Select the channels you will copy the settings to by using the “Apply Settings To” drop down menu.
7. Select the Copy button.